Fixed bollards not only can warn the vehicle, but also provide the best choice for areas unified style. Permanent bollards are easy to install, concrete casting is the best way. They have embedded security bollard and surface mounted bollard. It can be used together with retractable bollards for traffic landscape design or closing of appointed area.
Automatic rising bollards combine integration and security. Their design make them suitable for the protection of sites in both urban and prestigious environments.
In the raised position, these rising bollards close a road to vehicles, without restricting
access to pedestrians. In the lowered position, they are hidden, allowing access to vehicles.
Customers press the relevant button to get a ticket with queue number and approximate waiting time, then sit at waiting areas in comfort until his number is called. Customers are assured of first-come-first served basis
Features:
Type : Line Terminal printer with auto cutter
Paper end detector : yes
Service buttons : default 6 Maximum 32
Auto Cutter Mite : 1 million cuts
Ticket Format : large Number fonts,variable ticket length,multi language programmable logo and line message.
No. of ticket : programmable.default 1 copy
Paper roll : 80-mm width,low cost industry standard
Power : 24dcV
lt helps in keeping track of the activities on the counters, controls the printing of ticket numbers, queue management and calling of the next customer via the main display
Features:
Microprocessor : Embedded Web and Flails Memory
Power Source : 230VAC
On/Off Reset : Manually
Call Button’s Interface : RJ45(8 pin conn.)
Devices Interface : RJ45(8Ports\0)
Power Supply : built-in switching mode, 110/230VAC , SO/60 Flx,12VOC
Counter Display is installed at the service counter to display the counter number. The counter display shows. Same number as the terminal counter. Like the main display, it uses high brightness solid-segment LED to display ticket and counter numbers. Good visuals and reliability is assured
Features:
Display Type : 7-segment super bright LED
Digits Size : 2.3″or 4″ height
No of row : 1 row
No of digit : 4 or etc
Color :Bed or Green
Audio Output : Chime(option)
Arrow : lett/right (option)
Frame : 2″Thickness Aluminum
Frame Color : Silver/Brown/Black
Power :6w
One or more main Display may be installed at the waiting area to announce a new ticket along with the counter number which customer has to proceed to. The display blinks and a chime sound to attract immediate attention each time a number is called
Specifications
Display Type : 7-segment super bright LED
Digits Size : 2.3″ or 4″ Height
No of Row : 2, 3, 4 rows, etc..
No of Digit : 5/6digits per row
Color : red or green
Audio Output : Chime/Voice announcement (option)
Arrow : Left/Right (option)
Frame : 2″ Thickness Aluminum
The call station has a cardioid, supervised microphone on a gooseneck stem with good speech intelligibility. A limiter and a speech filter improve intelligibility and prevent clipping of the audio. It has a volume control for the monitoring speaker and the headset. When it plays a chime or a pre-recorded message, the call station activates its speaker. When a headset is connected, it replaces the microphone and speaker. The call station has its own DSP, and converts between analog and digital audio. The audio processing can include sensitivity adjustment, limiting, and parametric equalization.
Specifications
Electrical
External power supply : 18 to 56 VDC
Power consumption : 4.4 W (DC) excluding keypads
Microphone
Nominal acoustic input level : 75 to 90 dB SPL
S/N : >60 dB at 85 dB SPL
Frequency response : 340 Hz to 14 kHz (-3 dB)
Loudspeaker
S/N : 80 dB at max. output
Sound pressure level : 85 dB (SPL) at 0.5 m and 1 kHz
Headset
Connector : 3.5 mm jack
Recommended type : Hosiden HBH 0058
HIGH PERFORMANCE CIRCUIT
The Pre – amplifier includes the high performance circuit and performs better than 100dB of S/N ratio and
less than 0.1% of T.H.D.
BALANCED CIRCUIT
The Mic and Line circuits are designed with balanced circuit to prevent noise from outside.
Protection Circuits
Overload, Overheat, Soft-Start Automatic-Start Air Forced Cooling FAN.
Loose Free 120W Full Power@2/4Ω Selectable Speaker Impedance.
Phantom Powering with Assign Switch.
5Dot LED VU(-20/-10/0/+10dBu/PK) with Source Assign Switch.
Specifications
PRE Input/ Output Section
•Total Input Channel MIC/ LINE: 3CH/ 3CH
•MIC Input Impedance : 1.5kΩ @1kHz, Balanced
•LINE Input Impedance : 15kΩ @1kHz
•MIC/ LINE Input Sensitivity : -60/ -30dBu Max
•Overall Gain, 120W @4Ω, 1KHz : +98dB(MIC)
•REC Output Level : 0dBu, Unbalanced
•AF Output Level : 0dBu Normal, Balanced
•HPF MIC / LINE : MIC : 200-300-400Hz, -12dB/Oct, LINE : 50-100-200Hz, -12dB/Oct
•MIC EQ : 500Hz~10KHz, Gv=+/-12dB
•LINE EQ : LO(100Hz)/ HI(10KHz), Gv=+/-12dB
Speaker Output Section
•Frequency Response : 20Hz ~ 20kHz (±3dB)
•Rated Output Power : 120W RMS @2Ω/4Ω
•THD (@30W, 20Hz~20kHz) : Less than 0.1%
•S/N ratio (MIC, Wtd) : More than 102 dB
•Power Requirements : AC 220V ~, 50/60Hz
•Power Consumption : 250 Wmax
•Net Weight (kg/ lb) : 7/ 15.4
•Dimensions : 483(W)x88(H)x133(D) mm
THERMAL PROTECTION & AUTOMATIC IDLING CIRUITRY
Thermal protection circuitry is provided for stability and reliability against over-current and over-heating.
Automatic idling circuit is also provided to protect against thermal run-away.
MUTE START SYSTEM
To protect speakers and remove pop noise, start operating after 1 second.
BALANCED INPUT
To allow you to build reliable system, a balanced input is provided to reduce hum pick up from a long distance input cable and to
avoid group-loop problems.
USE OF EMERGENCY BATTERY
You can operate the power amplifier by using emergency battery for unexpected AC power failure.
Specifications
Rated Output : 400W (31V/ 4Ω, 44V/ 8Ω, 62V/ 16Ω)
Input Sensitivity / Impedance: 0 dBm (0.775V) / 20kΩ (Balanced)
T.H.D (@1 kHz) : Less than 1%
S/N ratio (@1kHz) : More than 85 dB
HPF (Switch ON) : －3dB @400Hz
Power Requirements : AC 220-240V, 50/60Hz, DC 24V
Power Consumption : 440W @1/8W Power
Dimensions : 482(W) × 133(H) × 300(D) mm